American Made SL-6090T Trike Lift

SL-6090T Air Lift Table

  • American Made in the U.S.A.
  • 60" Wide Table with 2 pcs. of our Quad Side Extension System
  • 90" Long Table
  • 2 Side Extensions from our Quad Side Extension system
  • Three 15" x 32" Ramps
  • Drive On Drive Off - Ramps can be mounted on the front or back
  • Four Mount Locations for Ramps.  Can go all the way across the platform
  • Frame Stabilizer Support System
  • Rear Drop Out
  • Removable Table Support System 
  • 2 1/2" Diameter Cam Bearings
  • 4" Diameter Phenolic Non Marking Wheels
  • Heavy Gauge Fully Box Framed Table
  • 1/4" C Channel Frame with 1" Greaseable Pivot Pins
  • CV-2049 Cycle Vise or SC-2000 Wheel Chock - Option
  • High Quality Powder Coated Top, Side Extensions, & Ramps
  • Hand Brushed Primed and Rust Protection Painted Frame
  • Designed for CanAm Spyders, Motorcycle Trikes, or 3 wheeled electric wheel chairs

What's Included:

  • SL-3090 Air Lift Frame with Top & Built in Rear Drop Out
  • Rebuildable 6" Air Cylinder Assembly
  • 3 Ramps
  • 2 Side Extensions
  • 2 Phenolic Wheels
  • Air Hose Whip and Center Closed Foot Valve
  • Frame Support System (4' Pipe and 2 Support Feet)
  • Removable Table Support Bar

Shipping:

  • All units ship via truck in our exclusive Halvzy Crate
  • Freight calculated based on order and destination

​Assembly Requirements:

  • The SL-6090T ships ready to add air right side up.  You don't have to flip this lift over after unloading.
  • Minimal assembly required....attach your air supply and air fitting to the 1/4" Brass nipple and you are ready to raise and lower the lift
  • Cycle Vise or Condor Wheel Chock must be mounted with fastener package
Made In America By Americans the SL-6090T Lift Table is the very best trike lift available.  The HMC SL-6090T lift table is versatile for trikes, BRP CanAm Spyders, or other 3 wheeled vehicles. The SL-Series lifts incorporate a 1/4" C Channel Frame which has heavy duty boxed support gussets, 1" greaseable pivot pins, Heavy 12 gauge fully boxed table, 1 person removable side extensions, standard rear wheel drop out, and phenolic non-marking wheels.

The SL-Series lifts have a rated capacity of 1,200 lbs. With our 7 1/2" closed height and the 32" long ramps, our lifts allow low clearance bikes to to have easy access.   The center table is an industry leading 90" in length by 30" in width and is designed for drive on drive off by simply adding additional ramps to the front.  With the 15" wide quad side extensions the table is Five Feet Wide.  The SL-6090T Lift Table comes standard with 3 ramps.
​
​HMC Industries manufactures the world's best motorcycle lifts.   We don't cut corners with cheaper materials like air bags or small bearings. Our lift tables will give you a lifetime of trouble free professional service.  Don't try to save $300 and be disappointed with an import that you can't service or repair or may fail with your expensive bike on it; buy quality, buy American, buy HMC Industries; you won't be disappointed.

ORDER ON LINE HERE