American Made SL-3086 Motorcycle Lift

Veteran Strong  
*Special Edition*

This is our newest lift and will be first available in our Veteran Strong Special Edition to pay tribute to America's Veterans.  Veterans can get a very special Discount Coupon Code by sending us your Military ID Card so we can verify your current or veteran status.

Only the first few lifts will include the SL-3090 tool trays..   The  table is powder coated Federal Specification Olive Drab and has some special edition decals in honor of our countries veterans.

SL-3086 Air Lift Table

​The SL-3086 motorcycle lift is our newest lift table. Designed for both small and large motorcycles, scooters, dirt bikes, mopeds, and other 2 wheeled vehicles, this could be America's #1 go to option for an all around motorcycle lift.  It has a perfect sized 30" wide x 86" long table and accepts our 15" x 32"ramp.  This lift is perfect for both the motorcycle service shop or the bike owner who wants a high quality American Made lift in their garage.
  • 30" Wide Table
  • 86" Long Table
  • 15" x 32" Ramp
  • Table ready for either CV-2049 Cycle Vise or Condor SC2000 Wheel Chock

What's Included:

  • SL-3086 Lift frame and top
  • 1 Ramp
  • Air Hose Whip and Center Stop Air Foot Valve

Shipping:

  • All units ship on a custom pallet via truck
  • Residential Delivery Fee is $35
  • Lift gate option is $35
  • Freight calculated based on order and destination
  • ​Local Pick Up is an Option

Assembly Requirements:

  • Minimal assembly required....attach your air supply and air fitting to the 1/4" Brass nipple and you are ready to raise and lower the lift
  • Typically requires 2 people to flip lift right side up after unloading
  • Cycle Vise or Condor Wheel Chock must be mounted with fastener package

Order Online Here

SL-3086

Made In America By Americans the SL-3086 is our newest motorcycle lift.  Built on the same rugged frame system the SL-3086 motorcycle lift incorporates a 1/4" C Channel Frame with heavy duty support gussets, 1" greaseable pivot pins, heavy gauge steel boxed table, and phenolic non-marking wheels.

The SL-3086 motorcycle lift is rated capacity for 1,200 lbs. With our 7 1/2" closed height and the 32" long ramps, our motorcycle lifts allow low clearance bikes to to have easy access.  The center table is a whopping 86" in length by 30" in width.
​
HMC Industries manufactures the best motorcycle lifts available in Marshalltown, Iowa.   Our lifts will give you a lifetime of trouble free service, which will allow you to service bikes either personally or commercially.  Don't try to save $300 and be disappointed with an import that you can't service or repair or may fail with your expensive bike on it; buy quality, buy American, buy HMC Industries; you won't be disappointed.