USA Made SL-6090 Lift for ATV's, UTV's, Golf Carts, and Turf Equipment

SL-6090 Air Lift  Table

  • American Made in the U.S.A.
  • 60" Wide Table with the Quad Side Extension System
  • 90" Long Table
  • Independent Quad Side Extension Design - Any Side Extension Can be removed by a single individual.
  • Two 15" x 32" Ramps
  • Drive On Drive Off - Ramps can be mounted on the front or back
  • Four Mount Locations for Ramps.  Can go all the way across the platform
  • Frame Stabilizer Support System
  • Rear Drop Out
  • Removable Table Support System 
  • 2 1/2" Diameter Cam Bearings
  • 4" Diameter Phenolic Non Marking Wheels
  • 12 Gauge Fully Box Framed Table
  • 1/4" C Channel Frame with 1" Greaseable Center Pivot Pins
  • CV-2049 Cycle Vise or SC-2000 Wheel Chock is an available option.
  • High Quality Powder Coated Top, Side Extensions, & Ramps
  • Hand Brushed Primed and Rust Protection Painted Frame
  • Designed for ATV, UTV, Zero Turn Mowers, Golf Carts, CANAM Spyders, Motorycle Trikes, John Deere Gators, Small Utility Vehicles, Large Motorcycles

What's Included:

  • SL-3090 Lift Top and Frame
  • Rebuildable 6" x 27" Air Cylinder
  • 2 Ramps
  • 4 Side Extensions
  • 2 Phenolic Wheels
  • Air Hose Whip and Center Closed Foot Valve
  • Frame Support System (4' Pipe and 2 Support Feet)
  • Removable Table Support Bar

Shipping:

  • All units ship via truck on our exclusive Halvzy Crate​
  • Freight calculated based on order and destination

​Assembly Requirements:

  • The SL-6090 ships ready to add air right side up.  You don't have to flip this lift over after unloading.
  • Minimal assembly required....attach your air supply and air fitting to the 1/4" Brass nipple and you are ready to raise and lower the lift
  • Cycle Vise or Condor Wheel Chock must be mounted with fastener package

ORDER ON LINE HERE

SL-6090 SERIES LIFT PHOTOS

​Made In America By Americans the SL-6090 Lift table sets the standard as the best powersport lift available. The HMC SL-6090 lift has many uses as an all terrain vehicle (atv) lift, utility vehicle (utv) lift, golf cart lift, mower lift, turf equipment lift, or even just as a motorcycle lift. The SL-Series lifts incorporate a 1/4" C Channel Frame which has heavy duty boxed support gussets, 1" greaseable pivot pins, heavy 12 gauge fully boxed table, unique quad side extensions, standard rear wheel drop out, and phenolic non-marking wheels.
These air lifts have a rated capacity of 1,200 lbs. With our 7 1\2" closed height and the 32" long ramps, our lifts allow low clearance bikes to to have easy access.   The center table is an industry leading 90" in length by 30" in width.  With the 15" wide side extensions the table is Five Feet Wide.  Our ramps are 15" wide, so there can be either 1 ramp or 4 ramps across the back or the front of the table.
​
HMC Industries manufactures the world's best motorcycle lifts.   We don't cut corners with cheaper materials like air bags or small bearings. Our lift tables will give you a lifetime of trouble free professional service.  Don't try to save $300 and be disappointed with an import that you can't service or repair or may fail with your expensive bike on it; buy quality, buy American, buy HMC Industries; you won't be disappointed.